Installation
Bidets and Bidet douches should be installed in accordance with Australia Standard AS3500 Section 10A
Plumber Guide
10A.2.3 Toilet seat douches
Where the douche outlet is, in all positions, at least 25mm above the overflow level of the pan, backflow prevention is not required.
Where the outlet, in any position, is less than 25mm above the overflow of the pan, a high-hazard backflow prevention device, complying with AS/NZS 2845.1 or AS/NZ 2845.2, shall be installed. This device shall be either part of the douche or installed separately.
Plumbing Info
Although the manufacturer has designed this product for easy installation, in other countries most people do it themselves. In New Zealand the plumbing code mandates that this product needs to be installed by a plumber and we do advise that you comply.
*Same rules apply to other household products like washing machine, fridges with water connection and any water filter or appliance connected to a water tap.
Handsprays
Handsprays shall be installed in accordance with The National Construction Code – Volume Three and where used as a douche spray are classified as High Hazard and appropriate additional backflow prevention will be required.
For use as a bidet spray, a RPZD that complies with
AS/NZS 2845.1 or AS 2845.2 needs to be installed for the application to comply
with AS/NZS 3500.1 Water Services Clause 12.2.3.
Step One
First thing to do is to measure from the front of the cistern to the front of the bowl (A size)
Step Two
Measure inside the bowl, front to back (C size) tttttttttttttttttttttttttttttt
Step Three
Is the water supply on the wall at the back or inside the cistern?
Installation Guide
Which bidet product do you own?